Please Note: www.reactivedata.com is no longer maintained
Please visit our sister company solidstatedisks.co.uk for our recent product lines.

BON Series - 2.5" PATA SSD - MLC Flash

Power Consumption +5 V ± 10%

Reading / Writing / Idel <mA / Max.>

360 mA / 390 mA / 240 mA

Capacity: 8GB / 16GB / 32GB / 64GB / 128GB / 256GB

Performance:
Sequential read : 107.8 MB/sec (Max.)
Sequential write : 82.4 MB/sec (Max.)
Average access time : 0.2ms (estimated)

  • Features:
  • Specifications:
  • Order Information:
  • Remarks:
> Standard 2.5” PATA (IDE) SSD form-factor
> Standard 44 pins PATA (IDE) male connector
> Data transfer mode support PIO 0~4 and UDMA 0~6
> Extremely rugged metal casing to endure harsh Environments
> Automatic 8 bits ECC and retry capabilities
> Supports static wear-leveling algorithms
> Supports Fast Erase by Hardware and Software definition
> Supports Secure Erase by Software ATA command vendor code
> Compatibility : ATA/ATAPI-7 and True IDE mode
> Form-factor : Standard Rugged Metal 2.5” PATA (IDE) SSD
> Host Interface : Standard 44 pins PATA (IDE) male connector
> Data transfer rate : Data transfer mode support PIO 0~4 and UDMA 0~6
> Environmental specification :
- Humidity : 10% ~ 95% non-condensing
- Acoustic noise : 0dB
- Vibration : 15G
- Shock : 1500G
> Reliability :
- Wear-leveling : Static wear-leveling algorithms
- MTBF : > 3,000,000 hours
- Endurance : > 2,000,000 cycles logically contributed by static wear-leveling and advanced bad
  sector management algorithms
- ECC : Enhanced management 8-bits per 512bytes block
- Data Data retention : 10 Years
> Physical specification :
- Weight (max.) : 115 g ± 5 g / 4.06 oz.
- Dimension(W x L x H) : 69.90 x 99.70 x 9.50 (mm)
> Warranty :
- 3 years warranty for SLC standard grade
- 5 years warranty for SLC industrial grade
- 1 years warranty for MLC product
> Conformal coating : Option for special request
> Functionality :
- Hardware : Fast Erase or Secure Erase the media data by hardware trigger
- Software : Fast Erase or Secure Erase the media data by ATA command vender code
> Sanitization Procedure :
- Default sanitizing by erase block data to 0xFF on file table for Fast Erase
- Sanitizing Based on NSA Manual 130-2 for Secure Erase
- Sanitizing Based on USA Air Force AFSSI 5020 for Secure Erase
- Sanitizing Based on DoD 5220.22-M for Secure Erase
- Sanitizing Based on IREC(IRIG)106 for Secure Erase
> Hardware Jumper Setting for Secure Erase & Fast Erase :

Capacity 2.5" PATA SSD - SLC
Standard Grade
2.5" PATA SSD - SLC
Industrial Grade
008GB SR2IFD008G-JACSC-U WR2IFD008G-JAISI-U
016GB SR2IFD016G-JACSC-U WR2IFD016G-JAISI-U
032GB SR2IFD032G-JACSC-U WR2IFD032G-JAISI-U
064GB SR2IFD064G-JACSC-U WR2IFD064G-JAISI-U
128GB SR2IFD128G-JACSC-U WR2IFD128G-JAISI-U
> /C: Industrial grade operating temp. -40º C ~ +85 º C with special conformal coating treatment on PCBA
> U: defaulted as UDMA mode / Fixed disk type
Click here to return to your last viewed page

 

Design: Bluemonkey
Bookmark and Share