Reactive Group Solid State Disks Ltd SCSIFLASH Arraid, LLC SCSI SDD
SanDisk® X600 SSD

SanDisk® X600 3D NAND SATA SSD

A NEW DIMENSION OF STORAGE

Ready to tackle any high-performance computing, embedded IoT, or industrial application, the SanDisk X600 SATA SSD is built on 64-layer 3D NAND technology and offers high capacity and enhanced reliability at blazing speeds.

Documentation


Manufacturer SanDisk

SanDisk® X600 3D NAND SATA SSD (Solid State Drive)

EXCEPTIONAL STORAGE OPTIONS FOR A BROAD RANGE OF COMPUTING APPLICATIONS SATA SAS PCIe

High Performance and High Capacity for Computing

Based on Western Digital 64-layer 3D NAND, the SanDisk® X600 3D NAND SATA SSD delivers high performance, high capacity, and superior endurance. In capacities of up to 2TB, the X600 3D NAND SATA SSD achieves this while expending up to 25% less power than our previous generations of SATA SSDs.

The X600 3D NAND SATA SSD combines Western Digital’s state-of-the-art 64-layer 3D NAND technology with our proven SSD platform. It also incorporates nCache™ 2.0, a tiered caching technology designed to improve responsiveness for corporate and consumer workloads. nCache 2.0 uses a combination of both SLC (single level cell) and TLC flash blocks to improve endurance, increase efficiency, and boost performance. Writing data first to the SLC cache reduces write amplification on the TLC blocks.

Lower Power, Higher Capacity and Thin Form Factors Offers Design Flexibility

The X600 3D NAND SATA SSD is optimized for the demanding power management requirements of ultra-thin and small form factor products.

It features Device Sleep (DEVSLP), more frequent use of low-power modes, and faster transitions between various power modes. Also included for superior error recovery, DataGuard™ Client provides a robust on-the-fly error handling technology.

With a variety of design and integration options for manufacturers and systems builders, the X600 3D NAND SATA SSD is available in either an SATA 2.5"/7mm cased or an M.2 2280 form factor, with capacities of 128 gigabytes2 (GB), 256GB, 512GB, 1 terabyte2 (TB), and 2 terabyte2 (TB).

DISCLOSURES

1. As used for storage capacity, one terabyte (TB) = one trillion bytes. Total accessible capacity varies depending on operating environment. 2. Active power draws are up to 25% lower during sequential reads than previous generations of SanDisk X400 SSD at the 512GB capacity point. 3. As used for transfer rate or interface, megabyte per second (MB/s) = one million bytes per second and gigabit per second (Gb/s) = one billion bits per second. 4. MTTF = Mean Time To Failure based on internal testing using Telcordia stress part testing. 5. TBW (terabytes written) values calculated using JEDEC client workload (JESD219) and vary by product capacity. 6. imensions and weight vary based on form factor and capacity.

 

Our Partners