| > |
Compatibility : SATA 1.0a, SATA 2.6 and SATA 3.0 Specification compliance |
| > |
Flash technology : SLC-NAND type flash based |
| > |
Form-factor : Rugged Metal 2.5” SATA II SSD |
| > |
Host Interface : SATA 7 pins (data) + 15 pin (power) |
| > |
Performance |
| - |
Data transfer rate :Serial ATA Gen-I, Gen-II and Gen-III (1.5Gb/s, 3.0Gb/s and 6.0Gb/s) |
| - |
Sequential read : 523.7 MB/sec (Max.) |
| - |
Sequential read : 371.9 MB/sec (Max.) |
| - |
Random access time : 0.1ms (estimated) |
| > |
Environmental specification |
| - |
Operation temp. : STD. 0°C~70°C/IND. -40°C~+85°C |
| - |
Non-operating temp. : STD. -20°C~+80°C/IND. -50°C~+95°C |
| - |
Humidity : 10% ~ 95% non-condensing |
| - |
Vibration : 7 Hz to 2K Hz, 20G, 3 axes |
| - |
Shock : 0.5ms. 1500G, 3 axes |
| - |
Altitude : 70,000 feet |
| > |
Power consumption |
| - |
Power requirement : +5V ± 10% |
| - |
Reading mode : 460 mA (Max.) |
| - |
Writing mode : 650 mA (Max.) |
| - |
Idle mode : 190 mA (Max.) |
| > |
Reliability |
| - |
Wear-leveling : Static wear-leveling algorithms |
| - |
MTBF : >4,000,000 hours |
| - |
Endurance : > 2,000,000 cycles |
| - |
ECC : 40-bits per 1024 bytes block |
| - |
Data Data retention : 10 Years |
| > |
Physical specification |
| - |
Weight (max.) : 115 g ± 5 g / 4.06 oz. |
| - |
Dimension(W x L x H) : 69.90 x 99.70 x 9.50 (mm) |
| > |
Warranty : |
| - |
Standard Grade 3 years |
| - |
Industrial Grade 5 years |
| > |
Conformal coating : Option for special request |
Please wait...
