Features
Vertical Type (High Speed) Standard Form-Factor
> MLC-NAND type flash technology
> Standard 7 pins SATA female connector
> Form-factor support vertical & horizontal
> High speed item (plastic casing) : 4GB ~ 128GB (Quad CH.)
> High speed item supports write protect function
> Power request optional: Built-in power pin-7 (w/fuse) or 5V power input power cable (w/o fuse)
> Performance up to 124.0 MB/sec (Quad CH.)
> Performance up to 73.0 MB/sec (Single CH.)
Specifications
> |
Compliant with Serial ATA standard rev. 1.0a and 2.6 |
> |
Flash Technology : NAND type MLC flash based |
> |
Form-factor : |
- |
vertical type standard & horizontal type bare low profile w/mounting hole |
> |
Perfromance : |
- |
Data Transfer Rate : Serial ATA standard Gen1(1.5Gbps) and Gen2 (3.0Gbps) |
- |
Sequential read : 124.0 MB/sec (Quad CH. Max.) |
- |
Sequential write : 73.0 MB/sec (Quad CH. Max.) |
- |
Average access time :0.2ms (estimated) |
> |
Environmental specification : |
- |
Humidity : 10% ~ 95% non-condensing |
- |
Vibration : 15G |
- |
Shock : 1500G |
- |
Altitude : 70,000 feet |
> |
Reliability : |
- |
Wear-leveling : Static wear-leveling algorithms |
- |
ECC : Enhanced management 16 bits per 512bytes block |
- |
Data Data retention : 10 Years |
> |
Power consumption : |
- |
5V±10% Build-in power pin-7(w/fuse) |
- |
5V power input power cable(w/o fuse) |
- |
Reading mode : 212.0 mA (Max.) |
- |
Writing mode : 254.0 mA (Max.) |
- |
Idle mode : 128.0 mA (Max.) |
> |
Warranty : |
- |
2 years warranty for MLC product |
> |
Conformal coating : Wide temperature grade -40°C ~ +85°C with special conformal coating |
|
treatment on PCBA. |
Warranty
Warranty : Standard grade 3 years / Industrial grade 5 years