Features
> MLC-NAND type flash technology
> mSATA module compatible with JEDEC Standard : MO-300A specification
> Compliant with SATA 1.0a/ 2.6/ 3.0 specification
> Capacity from 32GB up to 128GB
> S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) Bootable for O.S. Installation
> Maximum sequential read speed 540.4MB/sec
> Maximum sequential write speed 169.1MB/sec
Specifications
| > |
Compatibility |
| - |
SATA 1.0a, SATA 2.6 and SATA 3.0 Specification compliance |
| > |
Form-factor |
| - |
Standard mSATA form factor compliance with JEDEC MO-300A |
| > |
Flash Technology : MLC-NAND type flash based |
| > |
Host Interface : mini PCI-e connector with 52 pins SATA pin out |
| > |
Perfromance |
| - |
Data Transfer Rate : Serial ATA standard Gen-I, Gen-II and Gen-III |
| - |
Sequential read : 540.4 MB/sec (Quad CH. Max.) |
| - |
Sequential write : 169.1 MB/sec (Quad CH. Max.) |
| - |
Average access time :0.2ms (estimated) |
| > |
Environmental specification |
| - |
Operating Temp. : STD. 0°C~70°C/IND. -40°C~+85°C |
| - |
Non-operating Temp. : STD. -20°C~+80°C/IND. -50°C~+95°C |
| - |
Humidity : 10% ~ 95% non-condensing |
| - |
Vibration : 7 Hz to 2K Hz, 20G, 3 axes |
| - |
Shock : 0.5ms, 1500G, 3 axes |
| - |
Altitude : 70,000 feet |
| > |
Reliability |
| - |
Wear-leveling : Static wear-leveling algorithms |
| - |
ECC : Enhanced management 16 bits per 512bytes block |
| > |
Power consumption |
| - |
Power requirement : +3.3V±5% |
| - |
Reading mode : 320mA (Max.) |
| - |
Writing mode : 390mA (Max.) |
| - |
Idle mode : 95mA (Max.) |
| > |
Physical specification |
| - |
Weight : 8.0g ± 1g/0.3oz. |
| - |
Dimension (W x L x H) : 50.80 x 29.8 x 3.20 (mm) |
| > |
Warranty |
| - |
2 years warranty |
Warranty
Warranty : 2 years
Please wait...
