| > |
Compatibility : |
| - |
CFast Specification V2.0 |
| - |
SATA 1.0a, SATA 2.6, and SATA 3.0 |
| - |
Compatible with ATA/ATAPI-7 |
| > |
Flash Technology : SLC-NAND type flash based |
| > |
Form-factor : CFast Type I |
| > |
Host Interface : 7-pin (data) + 17-pin (power) CFast connector |
| > |
Perfromance : |
| - |
Data Transfer Rate : Serial ATA Gen-I, Gen-II and Gen-III (1.5Gb/s, 3.0Gb/s, 6.0Gb/s) |
| - |
Sequential read : 542.9 MB/sec (Max.) |
| - |
Sequential write : 265.7 MB/sec (Max.) |
| - |
Random access time : 0.1ms (estimated) |
| > |
Environmental specification : |
| - |
Operating temp : STD. 0°C-70°C/W.T.-40°C~+85°C |
| - |
Non-operating temp : STD. -20°C~+80°C/W.T.-50°C~+95°C |
| > |
Conformal coating : Option for wide temerature |
| - |
Humidity : 10% ~95% non-condensed |
| - |
Vibration : 7 Hz to 2K Hz, 20G, 3 axes |
| - |
Shock : 0.5ms, 1500 G, 3 axes |
| - |
Altitude : 70,000 feet |
| > |
Reliability : |
| - |
Wear-leveling : Static wear-leveling algorithms |
| - |
MTBF : >4,000,000 hours |
| - |
Endurance : >3,000,000 cycles |
| - |
ECC : 40 bits per 1024 bytes block |
| - |
Data retention : 10 years |
| > |
Power consumption : |
| - |
Power requirement : +3.3V +/- 5% |
| - |
Reading mode : 330mA (Max.) |
| - |
Writing mode : 330mA (Max.) |
| - |
Idle mode : 120mA (Max.) |
| > |
Physical specification : |
| - |
Weight (max.) : Plastic frame: 10.0±1g / 0.35oz |
| - |
Weight (max.) : Metal frame: 13.0±1g / 0.46oz |
| - |
Dimension(W x L x H) : 42.8 x 36.4 x 3.5 (mm) |
Please wait...
