Features
> SLC - NAND type flash technology
> S2.5” standard PATA (IDE) SSD form-factor
> Compatible with ATA/ATAPI-6 standard
> Performance up to 36.4MB/sec
> S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) Function and monitor software supported.
> Extremely rugged metal casing to endure harsh environment
> Capacity from 128MB up to 8GB
Specifications
> |
Compatibility : ATA/ATAPI-6 and True IDE mode |
> |
Flash technology : SLC-NAND type flash based |
> |
Form-factor : Rugged Metal 2.5” PATA (IDE) SSD |
> |
Host Interface : Standard 44 pins PATA (IDE) male connector |
> |
Master/Slave : By Jumper |
> |
Data transfer rate |
- |
PIO 0~4 Mode |
- |
MWDMA 0~2 Mode |
- |
UDMA 0~4 Mode |
> |
Performance |
- |
Sequential read : 36.4 MB/sec (Max. / dual CH.) |
- |
Sequential write : 26.5 MB/sec (Max. / dual CH.) |
- |
Random access time : 0.2ms (estimated) |
> |
Environmental specification |
- |
Operating temp. : STD. 0°C~70°C/IND. -40°C~+85°C |
- |
Non-operating temp. : STD. -20°C~+80°C/IND. -50°C~+95°C |
- |
Humidity : 10% ~ 95% non-condensing |
- |
Vibration : 15G compliance to MIL-STD-810F |
- |
Shock : 1,500G compliance to MIL-STD-810F |
- |
Altitude : 70,000 feet |
> |
Power consumption |
- |
Power requirement : +5V ± 10% |
- |
Reading mode : 124 mA (Max.) |
- |
Writing mode : 121 mA (Max.) |
- |
Idle mode : 1.8 mA (Max.) |
> |
Reliability |
- |
Wear-leveling : Static wear-leveling algorithms |
- |
MTBF : > 3,000,000 hours |
- |
Endurance :> 2,000,000 cycles logically contributed by static wear-leveling and advanced bad sector management algorithms |
- |
ECC : Enhanced management 8-bits per 512bytes block |
- |
Data Data retention : 10 Years |
> |
Physical specification : |
- |
Weight (max.) : 115 g ± 5 g / 4.06 oz. |
- |
Dimension(W x L x H) : 69.90 x 99.70 x 9.50 (mm) |
> |
Warranty : |
- |
Standard Grade : 3 years warranty |
- |
Industrial Grade : 5 years warranty |
> |
Conformal coating : Option for special request |
Warranty
Warranty : Standard grade 3 years / Industrial grade 5 years