FLASH2GUI Network Software

Summary of Image Editor capability

Summary of Image Editor capability

• View drive image contents.
• Extract files, folders or entire disk contents to PC (including exported recipes, message logs, recipe files etc)
• Add and remove files, folders from disk including recipes.
• Add new software install files to run from HD.
• Create a new formatted drive.

FLASH2GUI supporting

FLASH2GUI supporting other Solid State Disks products:

SCSIFlash™

The SCSIFlash emulation drive is a drop-in replacement for obsolete 3.5 inch and 5.25 inch SCSI-based hard disk, magneto-optical and tape drives on legacy systems and equipment that uses removable, solid state CompactFlash to replace the respective media. With data cable connection made to a standard, 50 pin SCSI-1 or SCSI-2 connector, SCSIFlash is seen by the host as if it the original drive. Data transfer rates are up to 10Mbytes/s depending on the drive technology being replaced.

Further SCSIFlash product details here

FLOPPYFlash™

The FLOPPYFlash emulation drive is a drop-in replacement for obsolete 3.5 inch, 5.25 inch or 8 inch floppy disk drives on legacy systems and equipment that uses removable, solid state CompactFlash to replace the floppy disk media. With data cable connection made to a standard, 34 pin floppy edge connector, FLOPPYFlash^TM is seen by the host as if it the original floppy drive. Data transfer rates are between 125kb/s and 500kb/s depending on the coding method selected.

Further FLOPPYFlash™ product details here

Features and Benefits

FLOPPYFlash™ and SCSIFlash™ Features and Benefits

► Ethernet network enabled.

► Host hardware and software compatible.

► Greatly increased reliability (MTBF) and media life.

► Fast and efficient field replacement with field-upgradable firmware via integral USB port.

► Lower power consumption, noise and heat.

► Reduction in unplanned downtime with fast recovery from system crashes or CPU failure.

► Standard 3.5 inch form factor.

► Requires a single 5V power supply.

Example Telco host systems include: 
Siemens EWSD V.9, Nokia DX, Alcatel 5ESS, Alcatel Lucent DACSIII/DACSIV, Lucent 1631, Ericsson AXE, Ericsson AXE10, Nortel DMS10,  NEC NEAX SIGMA 61E , NEC NEAX SIGMA Sigma, Alcatel Lucent S12, Fujitsu Fetex 150, Telebras Tropico, Stromberg-Carleson DCO, NTT, ITT, North Electric, ROLM & Sagem

Other key market application examples

Legacy semiconductor manufacturing hosts systems include:
HP1000, HP9000, HP UNIX HPUX9, HPUX10, AMAT (Applied Materials) P5000 / P5200, P5500, RTP, Endura, Centura, Canon FPS-3000, Canon FPS-5000, Canon B2000 / B2600,TSK, Tokyo Electron, TEL, LAM RESEARCH (CLASSIC, ENVISION) KLA, ASM EPI, KS, and DISCO.

Legacy industrial process control host systems include:
IRMX86, HP1000A, HP9000, 12016A, VAX, uVAX using RWZ01, RZ23, RZ28, RZ29 SCSI drives, Rosemount RS3, Honeywell Measurex TDC 2000 / TDC 3000 universal station on MX open and VX works, Thor VX8 & VX9, WDA History Module, Honeywell SBHM (Single Board History Module).

Legacy engineering and manufacturing hosts systems include: IRMX86, HP1000A, HP9000, 12016A, VAX, uVAX using RWZ01, RZ23, RZ28, RZ29 SCSI Drives, Rosemount RS3, Unipro90, Honeywell Measurex TDC 2000 / TDC 3000 universal station on MX open and VX works.

Power generation hosts systems include:
HP1000A, HP9000, 12016A, DEC VAX, uVAX using RWZ01, RZ23, RZ28, RZ29 SCSI HDD and Rosemount RS3.

Legacy oil and gas production host systems include:
IRMX86, HP1000A, HP9000, 12016A, VAX, uVAX using RWZ01, RZ23, RZ28, RZ29 SCSI Drives, Rosemount RS3, Honeywell Measurex TDC 2000 / TDC 3000 universal station on MX open and VX works.

Legacy mil/aero equipment host systems include:
Miltope, Thompson CSF, Dutch Signaal, OMTI, Solaris SUN SPARC/CPU-8VT, Iomega Bernoulli, IBM AS400 and RS6000. Examples of legacy simulator hosts systems include: Encore, Gould, 320 C2000 sim and Evans & Sutherland.