iSmart
iSmart
Intuitive software tool for SSD monitoring, lifetime prediction and alerts
iSMART is a proprietary software developed to access the SMART attributes of Innodisk SATA devices. The software gives the user full access to all SMART related data as well as being able to monitor additional parameters through a simple and user-friendly interface In addition, the SMART attributes can be exported and further analyzed to gain a comprehensive picture of SSD health and status.
SMART
When activated, the iAnalyzer tab displays the read/write behaviors of the SSD in real time. This allows the user to understand their application usage of the SSD. Sequential and Random I/Os are easily broken down into smaller and more comprehensible units.
|
 |
 |
iAnalyer / iSecurity
The integrated iAnalyzer function enables the user to gain a full picture of SSD usage, while iSecurity allows the user to execute security erase functions.
|
Automatic monitoring
The Alert tab helps the user set trigger points with Temperature, Health percentage, Remaining Capacity or Life Remaining. If these trigger points exceed their boundaries, the iSMART utility can send a warning to the user notifying them of any issues.
|
 |
 |
Provides API and support for multiple OS
Innodisk understand that customer applications are varied. Therefore, iSMART is able to support Windows and Linux OS and provide API to help customer integrate iSMART into their system.
|
Benefits
- User-friendly interface design makes it easy to monitor SSD health status and manage settings.
- iSecurity, write protect switch and iAnalyzer. One press design to help customer send command easily.
- Mail alert function help customer know the SSD status any time anywhere.
|
|
System Requirements
|
| Items |
iSMART |
|
| Processor |
1GHz or faster processor |
|
| RAM |
2GB |
|
| OS Support |
Windows: XP / 7 / 8.1 / 10 & Embedded Series
Linux: Fedora, CentOS, Ubuntu, Debian |
|
|
Frequently Asked Questions
Q1.Does iSMART support other brands of SSDs?
iSMART only supports reading of basic SMART attributes for non-Innodisk SSDs, as in temperature and power-on hours.
|
|
Q2.Why are the SMART attributes not the same?
Different controllers will have different SMART settings, which means the attributes displayed might be different.
|
|
Q3.Why do I get an error message saying I can’t open iSMART?
As iSMART uses ATA command it needs to be run as an administrator to open it.
|
iCover
iCover
Reliable recovery software that will quickly restore your system in case of a failure
iCover is an easy-to-use, highly-customized backup and recovery software tool designed for industrial computers. iCover will not only recover the operating system, but also all of the applications, drivers and personal data by using a recovery image. It is fully compatible with Microsoft Windows and Linux operating systems. Even if the system should become unresponsive, this quick recovery tool will restore it to its original state.
Remote Backup and Recovery
The iCover software tool supports SMB/CIFS protocols which helps the user facilitate system backup as well as system image recovery.
|
 |
 |
Intelligent Disk Management
iCover offers a user-friendly and intuitive way to manage your system. The software allows the user to readily create and manage system partitions.
|
Device Lockdown
iCover also helps keep your system safe and secure. By locking down the Mac address ID, iCover will help prevent any unauthorized system duplication.
|
 |
 |
GPIO Trigger
For the sake of simplicity, iCover allows the user to easily switch between user mode and recovery mode with the touch of a button.
|
Benefits
- Reduces repair time to a minimum
- Reduces product error rate
- Increases product competitiveness
|
|
System Requirements
|
| Items |
iCover series |
|
| Processor |
1GHz or faster processor |
|
| RAM |
2GB |
|
| Support Storage |
SSD/CF/mSATA/M.2 |
|
| OS Support |
Windows: XP / 7 / 8.1 / 10
Windows Embedded Series
Linux: Ubuntu, Yotco, CentOS |
|
| File System |
Windows: NTFS/FAT32
Linux: Ext4/Ext3/Ext2 |
|
|
Frequently Asked Questions
Q1. What is the compression rate for iCover?
Running on a Windows system our compression rate is higher than 60%.
|
|
Q2. How long does backup and system restore take?
With Windows 7 back up takes around 5 minutes, while system restore will take around 8 minutes.
|
|
Q3. Can I back up the system to NAS?
Yes, iCover supports CIFS/SMB protocol to back up the OS image.
|
iRAID
iRAID
Reliable RAID status monitoring tool
iRAID is a comprehensive RAID (Redundant Array of Independent Disks) management tool that allows the user to monitor RAID status and set up a notification system if any issues or changes were to occur.
Monitor RAID Status
The iRAID tool allows you to quickly access the real-time status of your RAID setup: the current status of your RAID card and solid state drives.
|
 |
 |
Manage RAID Levels
Handily switch between RAID level 0, RAID level 1 and port multiplier level, all according to what is most suitable for your application.
|
Timely Email Alerts
The user can pre-define parameters so that when a certain threshold is reached the user will be notified; allowing for a timely response.
|
 |
 |
Supports SMART attributes
In addition to RAID status, iRAID also supports access to SMART information. This allows the user to check the real-time status of every connected flash drive.
|
Benefits
- Easy disk management and lifespan prediction
- Intuitive design and user-friendly
- Offers iRAID API
- Customized user interface
|
|
System Requirements
|
| Items |
iRAID |
|
| Processor |
1GHz or faster processor |
|
| RAM |
2GB |
|
| Support Storage |
2.5” SSD/mSATA/M.2 2242,2260,2280,22110 |
|
| OS Support |
Windows: XP / 7 / 8.1 / 10
Windows Embedded Series
Linux (Only ExSS series): Fedora, CentOS, Ubuntu, Debian |
|
|
Frequently Asked Questions
Q1.Which Innodisk RAID cards supports iRAID use?
All products in the ExSS and ExPS series support iRAID.
|
|
Q2. Is the API compatible with different versions of Linux OSs?
If the customer first informs Innodisk about their Linux version; we can then offer a compatible API.
|
|
Q3. Is it possible to change the images and background of the user interface?
Yes, you can substitute the image in the icon folder.
|
Please wait...
